Raise and support the vehicle.
Remove the front fog lamp nuts from the fog lamp.
Remove the fog lamp from the front bumper fascia.
Disconnect the electrical connector from the fog lamp bulb/socket.
Remove the fog lamp bulb/socket from the fog lamp, turning counterclockwise, if required.
Installation Procedure
Install the fog lamp bulb/socket to the fog lamp, turning clockwise, if required.
Connect the electrical connector to the fog lamp bulb/socket.
Install the fog lamp to the front bumper fascia.
Notice: Use the correct fastener in the correct location.
Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Install the front fog lamp nuts to the fog lamp.
Tighten
Tighten the front fog lamp nuts to 10 N路m (89 lb in).
Lower the vehicle.
Check and adjust the front fog lamp aim as necessary.|||I beleive it comes aparte from behind the lower part of the bumper, like mine do.
It may be easier to do that in a garage some ware, than out in the elements.
